154
Setting up the bridges
Each Nokia A032 must be individually
programmed to identify its bridge partners. You
can only do this using the serial port or Telnet
interface:
1
Power up a Nokia A032 and log into the
serial port or Telnet interface program (see
Accessing the command line manager (CLM)
on page 67).
2
Enter the information for all the A032's
bridge partners using the
command, which has the format:
bridge add MAC Name
where
is the MAC address of a bridge
MAC
partner and
Name
partner, of up to 16 characters, which you
can choose.
3
Repeat steps 1 and 2 for all the other access
points.
4
Restart all the A032s.
Once all the Nokia A032s are operating they
will automatically learn where the various
network-attached computers reside and bridge
data to the correct location.
bridge
is a name for that
Nokia A032 Advanced User Guide