Optional parameter summary
Parameter
Radio-related
channel
domain
rts_threshold
short_retry
long_retry
sifs_time
frag_threshold
basic_rate
Access Point functions
net_name
ap_name
protocols
TCP/IP parameters
ip_address
subnet_mask
gateway
Command line interface
The following table gives a complete list of the
parameters available when using the
command. After the table an explanation of
each parameter is given. In most cases you'll
need to restart the unit in order for the change
to take effect (the CLM will prompt you to do
this when necessary).
If you are changing the parameters remotely
you can initiate a restart using the CLM
command.
restart
Sets radio frequency channel
Regulatory domain
IEEE802.11 parameter
IEEE802.11 parameter
IEEE802.11 parameter
IEEE802.11 parameter
IEEE802.11 parameter
Sets the 802.11 basic rate set
Logical name of wireless network
Identifier name for access point
Selects protocol filtering
Sets IP address of Nokia A032
Sets Subnet Mask for local network
Sets Default Route when TCP/IP filtering
Function
set
71