Setting Up The Management Blade - Fujitsu PRIMERGY BX900 User Manual

Configuring an openLDAP Server
Figure 57: Domain Users for MMB

6.2.4 Setting up the Management Blade

Open the BX900 MMB WebUI in advanced mode and navigate to Information/Operation ® User Management ®
Global Users. The following screenshot shows an example of the settings required for communication with an
openLDAP Server:
1. Enable LDAP: Enables LDAP authentication.
2. Enable LDAP SSL: Enables SSL communication between the MMB and the openLDAP Server. (Requires a
valid CA certificate to be uploaded to the MMB.)
3. Disable Local Login: Disables the option of logging in without LDAP authentication.
4. Always Use SSL Login: Enables only SSL logins at the MMB WebUI. (This option will be enabled automatically,
LDAP requires HTTPS to be enabled.)
5. Directory Server Type: Sets the LDAP Server type (OpenLDAP).
6. LDAP Server: IP address of the LDAP Server.
7. Domain Name: Name of the domain (e.g. testdomain2.local).
8. Base DN: Assigned automatically.
9. Groups Directory As Sub-Tree From Base DN: Not required.
10. Dept. Name: Name of the department.
11. LDAP Auth. User Name: Management account of the openLDAP Server in the notation "cn=Manager,dc=
testdomain2,dc=local".
12. LDAP Auth. User Password: Password of the manager account.
76
Global User Management
ServerView BX900 S1 Management Blade