Assigning Domain Users To The Mmb; Setting Up The Management Blade - Fujitsu PRIMERGY BX900 User Manual

Global User Management

6.1.3 Assigning Domain Users to the MMB

To enable a user to log in on the management blade as a domain user, AuthorizationRoles must be set for this user:
1. Create a new user if none exists.
2. Navigate to SVS ® Departments ® [YourDepartment] ® AuthorizationRoles
3. Open the properties of the desired role and add the user as a member in the [Members] tab.
(Multiple selection is permitted for a user.)
Figure 52: Active Directory: Users

6.1.4 Setting up the Management Blade

Open the BX900 MMB WebUI in advanced mode and navigate to Information/Operation ® User Management ®
Global Users. The following screenshot shows an example of the settings required for communication with a
Windows Active Directory:
1. Enable LDAP: Enables LDAP authentication.
2. Enable LDAP SSL : Enables SSL communication between the MMB and the Active Directory Server.( Requires
a valid CA certificate to be uploaded to the MMB.)
3. Disable Local Login: Disables the option of logging in without LDAP authentication.
4. Always Use SSL Login: Enables only SSL logins at the MMB WebUI. (This option will be enabled automatically,
LDAP requires HTTPS to be enabled.)
5. Directory Server Type: Sets the LDAP Server type. (Windows Active Directory).
6. LDAP Server: IP address of the LDAP Server.
7. Domain Name: Name of the domain. (e.g. testdomain1.local).
8. Base DN: Assigned automatically.
9. Groups Directory As Sub-Tree From Base DN: Not required.
10. Dept. Name: Name of the department.
ServerView BX900 S1 Management Blade
Configuring an Active Directory Server
71