Assigning Domain Users To The Mmb; Setting Up The Management Blade - Fujitsu PRIMERGY BX400 User Manual

Blade server systems

Hide thumbs Also See for PRIMERGY BX400:

Table of Contents

Global user management

5.1.3 Assigning domain users to the MMB

To enable a user to log in on the management blade as a domain user, AuthorizationRoles must be set for this user:

1. Create a new user if none exists.

2. Navigate to SVS → Departments → [YourDepartment] → AuthorizationRoles

3. Open the properties of the desired role and add the user as a member in the [Members] tab.

(Multiple selection is permitted for a user.)

Figure 32: Active Directory: Users

Open the BX400 MMB WebUI in advanced mode and navigate to Information/Operation → User Management →

Global Users. The following screenshot shows an example of the settings required for communication with a

Windows Active Directory:

1. Enable LDAP: Enables LDAP authentication.

2. Enable LDAP SSL : Enables SSL communication between the MMB and the Active Directory Server. (Requires

a valid CA certificate to be uploaded to the MMB.)

3. Disable Local Login: Disables the option of logging in without LDAP authentication.

4. Always Use SSL Login: Enables only SSL logins at the MMB Web UI. (This option will be enabled automatically,

LDAP requires HTTPS to be enabled.)

5. Directory Server Type: Sets the LDAP server type (Windows Active Directory).

6. LDAP Server: IP address of the LDAP server.

7. Domain Name: Name of the domain (e.g. testdomain1.local).

8. Base DN: Assigned automatically.

9. Groups Directory As Sub-Tree From Base DN: Not required.

ServerView BX400 Management Blade S1

Configuring an Active Directory Server

Table of Contents