Scan Operation; Scan Types - Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual

6

SCAN OPERATION

Scan types

FULL SCAN (p. 19)
495
kHz
Scan
Jump
PROGRAMMED SCAN
(p. 19)
Band
Scan edges
edge
Scan
Jump
FREQUENCY SKIP
FUNCTION (p. 24)
Band edge or
scan edge
Scan
Skip
Jump
18
Repeatedly scans all fre-
quencies over the entire re-
ceiver range.
2450.095
MHz
U.S.A. version cannot re-
ceive some frequencies.
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
Band
for frequencies within a
edge
specified range such as re-
peater output frequencies,
etc.
Skips unwanted frequen-
cies that inconveniently
stop scanning. This func-
Band edge or
tion can be turned ON and
scan edge
OFF in frequency skip func-
tion set mode.
Skip
Up to 25 programmed scan ranges (00A/00b to 24A/24b), full
scan, band scan and memory bank scan provide scanning
versatility. Each scan can have skip channels programmed.
SELECTED BAND SCAN
(p. 19)
Band Band
edge edge
Scan
Jump
MEMORY (BANK) SCAN
(p. 20)
Not yet
programmed
ch 01 ch 02 ch 03
ch 00
ch 04
SKIP
ch 49 ch 06
ch 05
MEMORY SKIP FUNCTION
(p. 22)
Not yet
programmed
ch 01 ch 02 ch 03
ch 00
ch 04
ch 49 ch 06 ch 05
Repeatedly scans all fre-
quencies over the entire se-
lected band.
Repeatedly scans memory
channels except skip chan-
nels within all programmed
channels or within a mem-
ory bank (A–H).
Skips unwanted memory
channels that inconvenient-
ly stop scanning. Skip
channels can be toggled
ON and OFF by pushing
[FUNC] + [(V/M) SKIP] in
memory mode.