Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual page 31

◊ VFO scan watch
q Select the desired memory channel to be watched.
w Push [V/M] to select VFO mode.
e Push [↔] for 2 sec. to start full scan, band scan or pro-
grammed scan. (p. 19)
r Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance for color LCD.
t Rotate [DIAL] to select "Priority" or "PRIo."
• "PRIo" disappears after 1 sec. and "oFF" and "PR" appears when
color LCD is OFF.
y Push [↔] or rotate the tuning dial while pushing [FUNC] to
select priority watch ON or priority watch ON with alert
(BELL).
• If the pocket beep function is activated, the receiver automatically
selects the tone squelch function when the priority watch is se-
lected.
Pause Scan : 10SEC Pause Scan : 10SEC
Priority : OFF Priority
Beep Audio : VOLUME Beep Audio : VOLUME
Light : AUTO Light
A.Power OFF : OFF A.Power OFF :
Priority watch set Priority watch is ON.
mode
Pause Scan : 10SEC
: ON Priority : BELL
Beep Audio : VOLUME
: AUTO Light : AUTO
OFF A.Power OFF : OFF
Priority watch with
alert is ON.
u Push [(MODE) SET] to exit set mode and start the watch.
• The receiver checks the memory channel frequency every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 22)
• If the priority watch with alert is ON, you can be alerted with
beeps and a flashing "P.B" or "ë."
• If the direction finding screen is selected, the receiver automati-
cally selects the simple screen when the priority watch starts.
FM
M:A18
145.765.000
TS 15.0
ALL
PRIO
S1 3 5 7 9
RX
VOL
While pausing on the memory channel,
"PRIO" flashes.
i Push [V/M] while the display shows the VFO frequency to
stop the watch.
7
PRIORITY WATCH
FM PRIO
RX
27