Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual page 53

Set mode
Tone squelch (p. 28)
Tone squelch tone
frequency (p. 28)
B
Duplex direction (p. 31)
B
Offset frequency (p. 32)
Scan resume time (p. 23)
Scan pause time (p. 22)
Priority watch (p. 26)
Confirmation beep (p. 40)
Backlighting (p. 13)
Auto power OFF (p. 40)
OPERATION FLOW CHART
Power save (p. 41)
Monitor switch action
(p. 41)
Dial speed (p. 42)
Lock function effect (p. 42)
Color LCD function (p. 43)
Color LCD contrast (p. 43)
Color LCD brightness
(p. 44)
L
Color LCD background
color (p. 44)
B: Does not appear within the broadcast band (0.495 – 1.620 MHz).
L: Appears when the color LCD is ON.
Displays for set modes show the default settings.
Push [↔] or rotate the tuning dial while pushing [FUNC] to
change the set mode condition.
15
49