Scan Operation; Scan Types - Icom COMMUNICATION RECEIVER IC PCR100 Instruction Manual

5

SCAN OPERATION

Scan types

PROGRAMMED SCAN
(p. 27)
Scan edges
Scan
Jump
SELECT MEMORY SCAN
(p. 31)
Not yet
programmed
ch 1 ch 2
SEL
ch 50
SEL
ch 49 ch 6
SEL SEL
MODE SELECT MEMORY
SCAN (p. 31)
Not yet programmed
ch 1 ch 2
FM
ch 50
FM
ch 49 ch 6
FM FM
26
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a
specified range such as
repeater output frequencies,
etc.
Repeatedly scans only select
memory channels within a
memory bank. This function
ch 3
can be turned ON/OFF in
SEL
[Memory SCAN] tab. Select
ch 4
channels can be set in the
ch 5
memory list screen.
SEL
Repeatedly scans
selected mode channels
within a memory bank. This
function can be set in
ch 3
FM
[Memory SCAN] tab of the
ch 4
setting screen.
AM
ch 5
FM
Up to 20 programmed scan ranges, memory scan, memory
select scan, memory skip scan, mode select memory scan
and auto memory write scan provide scanning versatility.
MEMORY SCAN
(p. 30)
Not yet
programmed
ch 1 ch 2
ch 50
ch 49 ch 6
MEMORY SKIP SCAN
(p. 31)
Not yet
programmed
ch 1 ch 2
ch 50
ch 49 ch 6
AUTO MEMORY WRITE
only
SCAN (p. 29)
Scan edge
Scan
Pause Pause
Program Program
ch 1 ch 2
Repeatedly scans memory
channels within a memory
bank (1–20).
ch 3
ch 4
SKIP
ch 5
Skips unwanted memory
channels that inconvenient-
ly stop scanning. This func-
ch 3
tion can be turned ON/OFF
in [Memory SCAN] tab.
ch 4
SKIP Skip channels can be set in
ch 5
the memory list screen.
The frequencies that the
programmed scan stops
are automatically program-
Scan edge
med into a selected memo-
ry bank.