Icom COMMUNICATION RECEIVER IC PCR100 Instruction Manual page 13

#0 SWEEP START/PAUSE BUTTON [s s / ] (p. 34)
Push to start/pause the band scope (sweep) function
which is used to observe signal conditions around the re-
ceive frequency.
NOTE: While using the band scope function, audio is
NOT output. To monitor the frequency, push [s/ ] to
pause the function, or push [ ] to cancel the function.
#1 MEMORY SCAN BUTTON [MEMO] (p. 30)
Push to start/stop any of the memory scans.
• "MEMO" flashes while scanning.
#2 SWEEP STOP BUTTON [ ] (p. 34)
Push to stop a band scope (sweep) function.
#3 SET BUTTON [SET]
Push to show the setting screen used to adjust settings for
scan functions, the band scope function and the automatic
mode function.
PANEL DESCRIPTION
2
9