Channel Name Programming; Memory Transferring - Icom IC-V8 Instruction Manual

Channel name programming

q
Select a "Channel Name Indication" type in
(pgs. 20, 51).
w
Push [C• ] to select memory mode, if necessary.
MR
e
Push [8•
SET
name programming mode.
• The character to be edited flashes.
r
Rotate [VOL] to select a character.
t
Push [Y] to move to the right, [Z] to move to the left.
characters can be used for channel name
• Up to
• Usable characters are; A–Z, 0–9, "space", +, –, =, , /, [, and ]
y
Push [#•
ENT
mode.

Memory transferring

Memory (call) channel contents can be transferred to the VFO or
to another memory channel.
D Memory/call
q
Select the memory (call) channel to be transferred:
Push [C• ] ([ B•
MR
Push [Y]/[Z] to select the memory channel.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
w
Push [C• ] for 1 sec. after pushing [A•
MR
lected memory contents to the VFO.
• VFO mode is selected automatically.
] after pushing [A•
] to fix and exit the channel name programming
VFO
]) to select memory (call) mode.
CALL
MEMORY PROGRAMMING
] to enter into the channel
FUNC
] to transfer the se-
FUNC
INITIAL SET MODE
.
6
26