Receive And Transmit - Icom IC-V8 Instruction Manual

Receive and transmit

q
Push [POWER] for 1 sec. to turn the power ON
w
Adjust volume to the desired level.
e
Set a frequency.
When a signal is received:
• Squelch opens and audio is emitted from the speaker.
• Signal indicator shows the relative signal strength level.
r
Push [9• ] after pushing [A•
H/L
tween high and low.
• "L" appears when low output power is selected.
t
Push and hold [PTT] to transmit, then speak into the micro-
phone.
• "TX" appears.
• Do not hold the microphone too close to your mouth or speak too
loudly. This may distort the signal.
y
Release [PTT] to receive.
For your information
Monitor function:
Push and hold [SQL] to listen to weak signals that do not open the
squelch.
BASIC OPERATION
] to toggle output power be-
FUNC
4
.
18