Icom IC-V8 Instruction Manual page 51

• Receive accept/receive inhibit
"Receive accept" ("SKIP" indicator does not appear) accepts
pager calls when the transceiver receives a signal with a code
the same as that in the code channel.
"Receive inhibit" ("SKIP" indicator appears) rejects calls even
when the transceiver receives a code the same as that in the
code channel. Transmit codes should therefore be programmed
for "receive inhibit," otherwise the transceiver will not reject un-
necessary calls.
• Pager/code squelch operation during channel indication
To use these functions in channel indication, the pager/code
squelch setting must be programmed with other memory contents
before selecting channel number indication.
PAGER/CODE SQUELCH
10
42