Memory Programming - Icom IC-V8 Instruction Manual

6

MEMORY PROGRAMMING

D Memory/call
q
Select the memory (call) channel to be transferred:
Push [C•
Push [Y]/[Z] to select the memory channel.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
w
Push [C•
• "--" and " X " flashes.
e
Push [Y]/[Z] to select the target memory.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
r
Push [C•
• Memory mode is selected and the contents are transferred to
the target memory.
D Clearing a memory
q
Push [C•
fer mode.
• " X " and a memory channel number flash.
w
Push [Y]/[Z] to select the memory channel to be cleared.
• When "dial" is assigned [VOL], rotate [VOL] to select the memory
channel. (p. 51)
• The call channel cannot be cleared.
e
Push [C•
[C•
MR
• Perform this operation within 1.5 sec, otherwise the memory clear-
ing is cancelled and the transceiver returns to the memory mode
• The contents of the selected memory are cleared.
r
Push [D•
27
call/memory
] ([ B•
MR
CALL
] momentarily after pushing [A•
MR
] for 1 sec after pushing [A•
MR
] after pushing [A•
MR
] after pushing [A•
MR
] for 1 sec after pushing [A•
] to return to regular operation.
CLR
]) to select the memory (call) mode.
] to enter the memory trans-
FUNC
FUNC
FUNC
].
FUNC
].
FUNC
] momentarily, then push
] again.