Initial Set Mode - Icom IC-V8 Instruction Manual

11
OTHER FUNCTIONS

' ' Initial set mode

The initial set mode is accessed at power on and allows you to set
seldom-changed settings. In this way, you can "customize" trans-
ceiver operations to suit your preference and operating style.
D D Entering initial set mode
q Turn power on while [∫] and [√] are pushed.
w Push [∫] or [√] to select the desired item.
e Rotate [VOL] to select the condition/value.
• To exit set mode, push [#•
D D Key-touch beep
Turns key-touch beep emission ON and OFF.
• Default: ON
D D Time-out timer
To prevent accidental prolonged transmission,
etc., the transceiver has a time-out timer. This
function cuts a transmission OFF after 1–30
min. of continuous transmission. This timer
can be cancelled.
• tOt.OF
• tOt. 1–30 : The transmission is cut OFF after the set period
49
: The time-out timer is turned OFF. (default)
elapses.
].
ENT
POWER ON
AT
F
TX
MR
F
TX
MR