Code Programming - Icom IC-V8 Instruction Manual

' ' Code programming

D D Before programming
The pager and code squelch functions require ID codes and a
group code. These codes are 3-digit DTMF codes and must written
into the code channels before operation.
q Decide the ID code of each transceiver and a group code for
your group.
w Decide whether you want to return to normal operation or code
squelch operation after a connection is made.
e Program the ID code, group code and transmit codes (other sta-
tion's codes) as below.
D D Code channel assignment
ID OR
GROUP CODE
Your ID code
Other parties'
ID code
Group code
Memory space*
*Channel CP automatically memorizes an ID code when receiving a
pager call. The contents in channel CP cannot be changed manually.
CODE CHANNEL
NUMBER
0
1–6
One of 1–6
P
PAGER/CODE SQUELCH
Optional UT-108 required
"RECEIVE ACCEPT" OR
"RECEIVE INHIBIT"
"Receive accept" only
"Receive inhibit" should be
programmed in each channel.
"Receive accept" must be
programmed.
"Receive inhibit" only.
10
40