Transferring Bank Contents - Icom IC-V82 Instruction Manual

■ Transferring bank contents

Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or erased.
➥ Push [C•
] to select memory mode.
MR
➥ Push [A•
] and [#•
FUNC
lect the desired memory bank.
• Bank initial blinks.
➥ Push [✱•
] (or [D•
ENT
push [Y Y ] and [Z Z ] to select the desired contents.
• Bank initial stops blinking.
w Push [A•
] and [8•
FUNC SET
e Push [Y Y ] or [Z Z ] several times until "bAk" appears.
• Bank initial appears.
r Rotate [VOL] to select the desired bank initial to transfer or
erase.
• Select "– –" indication when erasing the contents from the bank.
], then rotate [VOL] to se-
BANK
]) to select the bank then
CLR
] to enter .
SET MODE
MEMORY/CALL OPERATION
t Push [✱•
] (or [D•
ENT CLR
turn to regular memory condition.
y Repeat steps q to t for transferring or erasing an an-
other banks contents.
6
]) to transfer or erase, and re-
6
25