Playing Back The Recorded Clip - Sony PDW-F800 Operation Manual

Clip 1
REC REC REC
START STOP START
Notes
• It is not possible to record a clip shorter than 2 seconds.
If you stop recording within 2 seconds of starting, this
results in a 2-second clip.
If you stop recording and restart within 2 seconds of
the original start, this creates a single continuous clip
from the original start time.
• The maximum number of clips that can be recorded on
a single disc is 300. If an attempt is made to record
more than 300 clips, the error message "MAX # Clips"
appears, even if there is free capacity on the disc.
Playback control buttons
During recording, the playback control buttons
(EJECT, F REV, F FWD, NEXT, PREV, PLAY/
PAUSE, STOP) have no effect.

Playing back the recorded clip

Normal playback
By pressing the PLAY/PAUSE button, you can
review any length of recording on the viewfinder
screen in black and white or in color on the LCD
monitor. There are two other ways to review the
recording.
Recording review: You can view the last two
seconds of the recording on the viewfinder
screen in black and white or in color on the
LCD monitor.
Viewing color playback on a video monitor:
You can view the recording in color on a
color video monitor without the need for any
external adaptor.
You can also view playback video during a fast
forward or reverse search.
For details about the switches and controls used to
select the audio output signal and to adjust the audio
level, see page 20 and page 28.
To freeze a picture during playback
The following operation can also be done from
the RM-B150/B750 Remote Control Unit.
1
Press the PLAY/PAUSE button to start
playback.
86 Basic Procedure for Shooting
Clip 2
Clip 3
REC REC REC
STOP START STOP
2
Press the PLAY/PAUSE button again at
the instant when you want to freeze the
picture.
The playback pauses and a frozen picture
appears.
The timecode of the frozen frame is
displayed in the counter display and the
PLAY/PAUSE indicator now flashes (one
flash/second).
To restart playback
Press the PLAY/PAUSE button once again.
To display camera video in the
viewfinder during playback (Live & Play
function)
During playback, the viewfinder normally
displays the playback video. But you can enable
this function to view live camera video instead.
This is a convenient way to frame the next shot
and adjust the focus and exposure while viewing
recorded video on the LCD monitor or an external
monitor.
(How to select an item in the menu screen: Turn
the MENU knob to move the b mark to the
desired item.)
1
Display the OUTPUT 2 page of the
OPERATION menu.
For details on menu operations, see "Basic
menu operations" on page 206.
2
Select LIVE & PLAY, and then turn the
MENU knob to display "ON".
The camera video appears in the viewfinder,
even during playback.
You can still check the playback video on the
LCD monitor. Playback signals are output
from the video output connectors.
Clip playback modes
You can set the clip playback mode to either of
the following.
Continuous playback mode: The playback
target is all of the clips on the disc (factory
default setting)
Single clip playback mode: The playback target
is the currently selected clip only
To select single clip playback mode
Set SINGLE CLIP MODE in the CAM CONFIG
1 page of the MAINTENANCE menu to "ON".