Change Confirmation/Adjustment Progress Messages; Functions - Sony PDW-F800 Operation Manual

Item Description
DISP DISC Remaining disc capacity
indicator
DISP IRIS Iris opening indicator
a) The viewfinder display can be also turned on or
off by using the DISPLAY of the DISPLAY/
ASPECT switch on the viewfinder.
b) For detailed information on the display mode, see
"Change confirmation/adjustment progress
messages" (page 215).
VF DISP 2 page
Item Description
DISP ZOOM Zoom position indicator
DISP COLOR Displays the color
TEMP temperature.
DISP BATT Displays the battery
a) voltage/remaining capacity
REMAIN
of an internal battery pack
or an external battery
connected to the DC IN
connector.
DISP DC IN Displayed when the power
is supplied from an external
battery connected to the
DC IN connector.
DISP 16:9/4:3 Displays the video aspect
ID ratio (16:9 or 4:3). (When
the CBKZ-MD01 is
installed.)
DISP WRR RF Displays the reception level
LVL of the wireless microphone.
DISP REC Displays the recording
FORMAT format.
DISP CLIP During playback, displays
NO(PB) the clip number and total
number of clips.
DISP Displays the timecode.
TIMECODE
DISP ALAC Aberration correction
function display
a) When an Anton Bauer battery system or a BP-
GL65/GL95 battery pack is installed, the
remaining battery power is shown as a
percentage value (%) according to the setting of
this item.
INT: When one of the above batteries is
installed, the remaining power is shown as a
percentage value (%) when there is a change
in the value or when the power is low.
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
AUTO: The remaining power is shown as a
percentage value (%) when one of the above
batteries is installed. Otherwise the voltage
(VOLT) is displayed continuously.
VOLT: The voltage (VOLT) is displayed
continuously.
VF DISP 3 page
Item Description
DISP CLIP Selects the type of clip name to
NAME
display.
DISP SCENE Turns on or off the display of
FILE the number of the currently
loaded scene file.
LOW LIGHT Turns on and off the on-screen
warning that the average level
of the video has dropped
beneath a set level.
LOW LIGHT Sets the LOW LIGHT
LEVEL threshold value.
VF BATT Specifies the remaining battery
WARNING capacity level that starts the
flashing warning in the
viewfinder.
ABSOLUTE Turns on and off the mode that
VALUE displays numeric menu
settings as absolute values.
a) Displayed clip names are also linked to the
settings of "Display Title" and "Planning Clip
Name in Clip Info. Area" in the Disc Menu.
b) This makes it possible to display settings that
include reference settings, stored with STORE
ALL PRESET or other functions, as absolute
values.
3
Turn the MENU knob to select the
desired setting (ON, OFF, or value), and
press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Change confirmation/adjustment
progress messages
You can limit or suppress the messages that give
details of setting changes and adjustment
progress and results by setting a display mode.
The conditions under which messages are
displayed and their correspondence with the
display mode are as follows:
a)
b)
215