Sony PDW-F800 Operation Manual page 188

No. Page
10/10 TIMECODE
188 Menu List
Item Settings
TC OUT AUTO/GENE
DF/NDF DF/NDF
(When SYSTEM
FREQUENCY is set
to "59.94i",
"29.97P", or
"59.94P")
EXT-LK DF/NDF INT/EXT
(When SYSTEM
FREQUENCY is set
to "59.94i",
"29.97P", or
"59.94P")
EXT-LK UBIT INT/EXT
LTC UBIT FIX/TIME
VITC UBIT (SD) FIX/TIME
(When the CBKZ-
MD01 is installed)
WATCH AUTO OFF/ON
ADJ
UBIT GROUP ID 000/101
VITC INS LINE 1 NTSC: 12H to
(When the CBKZ-
MD01 is installed) PAL: 9H to 19H
VITC INS LINE 2 NTSC: 12H to
(When the CBKZ-
MD01 is installed) PAL: 9H to 21H
Description
Selects the timecode signal output.
AUTO: Outputs the timecode generator
output during recording and outputs the
timecode reader output during playback.
GENE: Outputs the timecode generator
output during recording and playback.
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
Selects either internal setting or external
setting for DF/NDF.
INT: Internal
EXT: External
Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the
timecode is locked to an external source.
INT: Internal lock
EXT: External lock
Sets the data to be recorded in U-BIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Sets the data to be recorded in U-BIT of
VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Matches the time of the internal clock with the
time data of the user bits of an external
timecode. Turns the automatic time correction
function of the internal clock on or off.
Selects the U-BIT GROUP ID.
Selects the line into which VITC is to be
16H to 19H inserted.
to 22H
18H to 19H
to 22H