Sony PDW-F800 Operation Manual page 192

No. Page
14/14 CAM
CONFIG 3
15/15 PRESET
WHITE
192 Menu List
Item Settings
ALAC OFF/AUTO
DC SDI WIDE/NARW
BANDWIDTH
COLOR TEMP <P> Display
reference color
temperature.
C TEMP BAL <P> (–99 to 99)
R GAIN <P> (–99 to 99)
G GAIN <P> (–99 to 99)
AWB ENABLE <P> OFF/ON
Description
Specifies whether to activate the aberration
correction function.
OFF: Do not activate.
AUTO: Activate aberration correction when a
lens that supports aberration correction is
mounted.
Note
For some aberration correction lenses, the
aberration correction function may not
activate ("ALAC" does not appear in the
viewfinder) immediately after this unit is
powered on, even when this item is set to
"AUTO". If this occurs, turn the zoom and
focus rings of the lens all the way to one side,
and then check to make sure that "ALAC" has
appeared in the viewfinder.
Contact your dealer or a Sony service
representative for more information about
lenses that support aberration correction.
Specifies the video bandwidth of SD-SDI
output after down conversion.
WIDE: Wideband
NARW: Narrowband
Sets the white balance preset value.
Finer setting when the desired color could not
be obtained with the COLOR TEMP <P>
color temperature setting.
Sets the R gain preset value.
Sets the G gain preset value.
When the WHITE BAL switch is set to PRST,
turns the function that enables execution of
AWB (auto white balance) on and off.