Sony PDW-F800 Operation Manual page 196

No. Page
22/23 NETWORK 1 NETWORK SETUP
NETWORK
SETTING
196 Menu List
Item Settings
DHCP
IP ADDRESS
SUBNET MASK
DEF.GATEWAY
LINK SPEED
DUPLEX
DNS1
UPnP
DHCP ENABLE/
DISABLE
IP ADDRESS xxx.xxx.xxx.xxx
192.168.1.10
SUBNET MASK xxx.xxx.xxx.xxx
255.255.255.0
DEF.GATEWAY xxx.xxx.xxx.xxx
0.0.0.0
LINK SPEED AUTO/10Mbps/
100Mbps
DUPLEX AUTO/FULL/
HALF
DNS1 xxx.xxx.xxx.xxx
0.0.0.0
DNS2 xxx.xxx.xxx.xxx
0.0.0.0
UPnP DISABLE/
ENABL
Description
EXEC
Display only
Display only
Display only
Display only
Display only
Display only
Display only
Display only
Selects whether to enable automatic
acquisition of the IP address from a DHCP
server.
Notes
• IP address, subnet mask, default gateway, and
DNS server 1 and 2 cannot be set when DHCP
is set to "ENABLE".
• To check automatically acquired settings, close
the menu and open it again.
Set the IP address of this unit.
Sets the subnet mask.
Set the address of the default gateway.
Sets the communications speed.
Sets the duplex mode.
Set the address of DNS server 1.
Set the address of DNS server 2.
Select whether to enable the UPnP (universal
plug and play) function.
DISABLE: Disable the UPnP function.
ENABLE: Enable the UPnP function.
Displays the
NETWORK
SETTING page,
so that you can
make network
settings.
Enables or
disables
automatic
acquisition of an
IP address from a
DHCP server
IP address
Subnet mask
Default gateway
Link speed
Communications
method
DNS server 1
Enable or disable
UPnP.