Viewfinder left-to-right positioning ring
Viewfinder front-to-back positioning knob
Moving the viewfinder shoe up
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly and handle front cover.
42
Attaching the Viewfinder
Handle front cover
Viewfinder slide assembly
3
Attach the handle front cover with the
bottom edge up.
To attach the viewfinder
at the top
To attach the viewfinder
at the bottom (factory
default)
4
Attach the viewfinder slide assembly,
reversing the steps of the removal
procedure.
Bolt with
hexagonal hole