Sony PDW-F800 Operation Manual page 199

No. Page Item
27/28 UP UP CON PROCESS FIELD/ADPT
CONVERTER
UC DETAIL
LEVEL
UC CRISPENING
UC DETAIL LIMIT (–99 to 99)
UC LV DEPEND
LVL
UC DTL
FREQUENCY
UC DTL H/V
RATIO
[800]
28/– SHUTTER SELECT SECOND/
SHUTTER
SELECT
ADD
(only when
SHUTTER SELECT
is set to "DEGREE")
DEL
(only when
SHUTTER SELECT
is set to "DEGREE")
1 to 6
(only when
SHUTTER SELECT
is set to "DEGREE")
a) The setting of this item is overridden by the setting of
Other BEFORE END when TYPE DETECTION in
Settings Description
Selects the conversion source picture when
SD is upconverted to HD.
FIELD: Use the field picture.
ADPT: Optimize the ratio of conversion from
the frame or field picture.
(–99 to 99) Adjusts the sharpness of edge enhancement
by the upconverter.
(–8 to 7) Sets the amplitude width at which the
upconverter does not emphasize low-
amplitude signals.
Sets the maximum level of edge enhancement
by the upconverter.
(–8 to 7) Sets the luminance of edge enhancement by
the upconverter.
3.2M/4.5M/ Sets the center frequency and frequency
5.0M/4.0M properties of edge enhancement by the
upconverter.
3.2M: 3.2 ± 1.1 MHz
4.5M: 4.5 ± 1.4 MHz
5.0M: 5.0 ± 0.7 MHz
4.0M: 4.0 ± 2.0 MHz
(–3 to 4) Sets the horizontal/vertical ratio of edge
enhancement by the upconverter.
Selects the shutter speed display unit.
DEGREE SECOND: Second units
DEGREE: Degree units (shutter opening
angle)
See page 69 for more information about
degree unit settings.
360.0 to 180.0 to Registers a shutter degree setting in an empty
4.5 (upper limit number from 1 to 6 (this item is disabled if no
of shutter angle number is empty).
degrees)
– Deletes the setting assigned to a number from
1 to 6 (numbers with no settings assigned
cannot be selected).
Display only Displays the shutter opening angle assigned to
number 1 to 6, and the corresponding speed in
second units, as calculated on the basis of the
selected frame rate.This differs as follows,
depending on the setting of SYSTEM
FREQUENCY.
59.94i, 29.97P: 1: 216.0, 2: 180.0, 3: 90.0, 4:
45.0, 5: 22.5, 6: 11.2
50i, 25P: 1: 180.0, 2: 150.0, 3: 90.0, 4: 45.0,
5: 22.5, 6: 11.2
23.98P: 1: 180.0, 2: 172.8, 3: 144.0, 4: 45.0,
5: 22.5, 6: 11.2
the BATTERY 2 page is set to "OTHER".
Menu List 199