2-4 Playing back the
2-4-1 Playing back the shooting location
2
recorded on a tape
Preparation
Perform the following to display shooting locations recorded on a tape
on a monitor of a personal computer using mapping software.
• Connections
For detailed information, see the following "Connections".
• Setting the output format of data from the camcorder
For detailed information, see "2-6 Menu Setup" on page 2-17.
Connections
Connect the REMOTE connector of the camcorder and the RS-232C
connector of the computer on which mapping software has been
installed.
2-12
Chapter 2 Using GPS Data (When Using an HKDW-704)
Shooting Location