Sony PDW-F800 Operation Manual page 194

No. Page
17/18 AUTO IRIS 2 IRIS WINDOW
18/19 GENLOCK
19/20 ND COMP
194 Menu List
Item Settings
1/2/3/4/5/6/VAR Selects the auto iris detection window.
IRIS WINDOW OFF/ON
IND
IRIS LEVEL (–99 to 99)
IRIS APL RATIO (–99 to 99)
IRIS VAR WIDTH 20 to 240 to 479 Adjusts the width of detection frame when the
IRIS VAR HEIGHT 20 to 135 to 269 Adjusts the height of detection frame when
IRIS VAR H POS –460 to 0 to 459 Adjusts the horizontal position of detection
IRIS VAR V POS –250 to 0 to 249 Adjusts the vertical position of detection
IRIS SPEED (–99 to 99)
CLIP HIGH LIGHT OFF/ON
GENLOCK OFF/ON
GL HD H PHASE (–99 to 99)
GL SD H PHASE (–99 to 99)
(Does not appear
when the FORMAT
page item SYSTEM
LINE is set to 1080
and the SYSTEM
FREQUENCY item
is set to 23.9P)
REFERENCE INTERNAL/
GENLOCK/
SDI IN
ND OFFSET OFF/ON
ADJUST
CLEAR ND EXEC
OFFSET
Description
VAR: variable
Turns on and off the function which displays a
frame marker for the auto iris detection
window.
Adjusts the level of the auto iris target value.
Adjusts the mix ratio of auto iris detection
peak value and average value.
auto iris detection window is set to VAR.
the auto iris detection window is set to VAR.
frame when the auto iris detection window is
set to VAR.
frame when the auto iris detection window is
set to VAR.
Adjusts the auto iris speed.
Turns on and off the function which, during
auto iris adjustment, ignores very bright areas
by dulling the reaction to high luminescence.
Turns genlock on and off.
Sets the HD output H phase for genlock
operation.
Sets the SD output H phase for genlock
operation.
Displays the type of reference signal used by
this unit.
Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
Clear ND filter color compensation values.