Enabling/Disabling Voice Prompts; Enabling/Disabling Sidetone - Sena SPH10H-FM-01 User Manual

SPH10
friend by speaking any word loudly enough.The
most effortless way to trigger intercom VOX is to
blow into the microphone as if blowing dust off the
microphone. If you start an intercom conversation
by VOX, the intercom terminates automatically when
you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to
terminate the intercom conversation manually.
However, even when this feature is enabled, if you
terminate intercom conversation manually with the
Jog Dial, you are not able to start intercom by voice
temporarily. In this case, you have to tap the Jog Dial
to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind
noise. If you tap the Jog Dial to start an intercom
conversation, it is not terminated by 20 seconds of
silence. After turning SPH10 off and on, you can start
intercom by voice again.
20

9.4 Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable
Disable
You can disable voice prompts by configuration setting,
but the following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for factory reset

9.5 Enabling/Disabling Sidetone

Voice Prompt
Factory Default
Enable
Disable
Sidetone is the sound of your own voice as picked up
by your headset's microphone and reproduced in your
own ear, by your own speaker. It helps you to naturally
speak at the correct level according to varying helmet
noise conditions. If this feature is enabled, you can hear
what you are speaking during an intercom conversation
or a phone call.
"Voice prompt"
Enable
Tap the Phone Button
Tap the Jog Dial
"Sidetone"
Disable
Tap the Phone Button
Tap the Jog Dial