Okina WDE-7680 User Manual page 31

* DATE / TIME
** DATE / TIME **
TIME
DATE
FORMAT
RETURN EXIT
HH: Hour, MM: Minute, SS: Second, YY: Year, MM: Month, DD: Date.
Select ON/OFF to show/hide the Date/Time on the screen.
* COMM
There're sub-menus under this section. Select SET
1. The CAM ID, PROTOCOL and BAUD RATE will be displayed for the first five seconds on
boot.
2. Changes made to the CAM ID, PROTOCOL and BAUD RATE will only take effect after
you exit the COMM page. This is to prevent the camera from unexpected disconnecting
caused by remote access.
•CAM ID: 1~1024
•DISP CAMERA ID: ON/OFF (*Select ON/OFF to show/hide the CAM ID on the screen.)
•PROTOCOL: PELCO-D, PELCO-P
•BAUD RATE: 2400/4800/9600/19200/38400
* SYNC
•INT: Internal synchronization
•LL: External line-lock synchronization: when LL is selected, press the ENTER button to
confirm. The phase can be set from 0 to 359.
* LANGUAGE
简体中文
•ENGLISH •
Use the LEFT & RIGHT buttons to select the language preference.
* FIRMWARE
Please refer to the actual firmware.
* RESTORE
Please choose CANCEL to exit; once the CONTINUE is chosen, all the settings will be
restored to the defaults except for the following: CAM ID, PROTOCOL, BAUD RATE and
LANGUAGE.
Copyright © 2010. All Rights Reserved.
www.okinausa.com
10:00:00
10:01:01
YY:MM:DD
繁體中文
•
27
to do further setups.
<┘
REV122010-V17