Table of Contents
Related Manuals for Okina WDEDX-768AI 680 TVL
Summary of Contents for Okina WDEDX-768AI 680 TVL
-
Page 1: User Manual
WDEDX-768AI 680 TVL WDEDX-761AI 610 TVL Hyper Wide Dynamic Dome Camera - Effio WDR User Manual Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference. -
Page 2: Safety Warnings
Safety Warnings 1. Read this manual carefully before installing the unit Please read this manual first for correct installation and operation. 2. Never install the camera on a ceiling that cannot hold its weight The product may fall down and cause damages. 3. - Page 3 THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE REFERENCE. Warranty OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1. Camera sticker is removed If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased.
-
Page 4: Table Of Contents
Table of Contents 1. INTRODUCTION ..........................1 1.1 M ..........................1 EATURES 1.2 C ..........................1 ONTENT 1.3 S ..........................2 PECIFICATIONS 2. CAMERA OVERVIEW ........................3 2.1 D ........................... 3 IMENSIONS 2.2 D ...................... 4 ESCRIPTION OF AMERA ARTS 3. -
Page 5: Introduction
1. Introduction WDEDX-768AI and WDEDX-761AI are built with Sony’s latest image processor, this super-wide dynamic camera has the capability of achieving resolutions of over 680 TVL or 610 TVL respectively. The features include 2-D and 3-D noise reduction, sense up, spot removal, strong-light suppression, intelligent motion, face detection and OSD functions. -
Page 6: Specifications
1.3 Specifications D-225 D-226 Model WDEDX-768AI WDEDX-761AI 1/3" Sony Double-speed (Double-density) CCD Image Sensor NTSC: 1028(H)x508(V) NTSC: 811(H) X 508(V) Number of Total Pixels PAL: 1024(H)x596(V) PAL: 795(H) X 596(V) Color: 680TVL, B/W: 700TVL Color: 610TVL, B/W: 630TVL Resolution Sony Effio WDR Sony Effio WDR Color: 0.1 Lux @ F1.2, B/W: 0.08 Lux @ F1.2, Sense-up: 0.0001 Lux @ F1.2 Minimum Illumination... -
Page 7: Camera Overview
2. Camera Overview 2.1 Dimensions Copyright © 2010. All Rights Reserved. www.okinausa.com REV122010-V17... -
Page 8: Description Of Camera Parts
2.2 Description of Camera Parts ①. FAR/NEAR To adjust the lens focus for near and far. ②. WIDE/TELE To adjust the lens angle for wide and tele. ③. OSD Control Buttons ENTER button UP & DOWN button LEFT & RIGHT button ④. -
Page 9: Osd Operation
3. OSD Operation 3.1 OSD Control Buttons Use this button to move the cursor upwards to the desired item. RIGHT Use this button to move the cursor to the right to select or to adjust the parameters of the selected item. The parameter increases when the right button is pressed. DOWN Use this button to move the cursor downwards to the desired item. -
Page 10: Osd Operation
3.2 OSD Operation ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ WHITE BALANCE 2DNR & 3DNR SET<┘ DAY / NIGHT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘ EXIT Start to operate the OSD menu Press the ENTER button to bring up the OSD main menu to start operating OSD menus. -
Page 11: Configuration
4. Configuration 4.1 LENS When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to the LENS and press the ENTER button to do further setups. ** LENS ** ** MAIN MENU ** LENS DC<┘ LENS SET<┘... -
Page 12: Agc
4.2 AGC When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to the AGC and press the ENTER button to do further setups. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ There’re 3 options under AGC : AUTO, OFF and WHITE BALANCE 2DNR &... -
Page 13: Wdr
4.3 WDR 1. When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to WDR and press the ENTER button to do further setups. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ There’re 3 modes under WDR function: WDR, WHITE BALANCE 2DNR &... - Page 14 *BLC (Back Light Compensation) ** BLC ** Options under this mode are LEVEL RETURN EXIT Level : 1~14. Sub-Menu under BLC mode. Even when there is a massive backlight behind the object, bright images of the background and the object can still be captured by selecting the BACKLIGHT mode. Level: 1~14 *OFF When set as OFF, there’ll be no wide dynamic range.
-
Page 15: White Balance Control
4.4 WHITE BALANCE Control The screen color can be adjusted by using the WHITE BALANCE function. 1. Please use the UP and DOWN buttons to WHITE BALANCE on the MAIN MENU and press the ENTER button to do further setups. 2. - Page 16 * AWC (Auto White Balance Control) **AWC ** **AWC ** Follow the instructions PRESS AND HOLD shown on the screen to COMPLETED ENTER BUTTON complete the setting. PRESS ENTER RETURN UNTIL AWC COMPLETED. Sub-Menu under AWC mode. Sub-Menu under AWC mode. To find the optimal setting for the current luminance environment in this mode, point the camera towards a sheet of white paper and press the ENTER button.
-
Page 17: 3D Nr (Dynamic Noise Reduction)
4.5 2D &3D NR (Dynamic Noise Reduction) ** MAIN MENU ** ** 2DNR & 3 DNR ** LENS SET<┘ 2DNR ON<┘ AUTO 3DNR ON<┘ WDR<┘ RETURN EXIT WHITE BALANCE 2DNR & 3DNR SET<┘ DAY / NIGHT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘... - Page 18 *3DNR ** 3DNR** LEVEL RETURN EXIT Sub-Menu under the 3DNR mode •ON: When the 3DNR is set to ON, there’s a submenu available for level adjustment, ranged from 0 to 15. The higher the level, the more noise can be reduced but moving objects be blurred in low illumination condition.
-
Page 19: Day/Night
4.6 DAY/NIGHT The camera can be set in Color or B/W mode in the Day/Night function. NOTE: EXT function is not available for DOME cameras. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ WHITE BALANCE There’re 5 modes under this function: COLOR, 2DNR &... - Page 20 •DELAY TIME: Sometimes there’s only a sudden and short light level change. Delay time can be set to avoid switching too fast. The camera will switch the mode after the set DELAY TIME passed. DELAY TIME can be set from 0 to 255 seconds. •NIGHT OUTPUT OUTPUT SYSTEM...
- Page 21 NIGHT INPUT: Select input level. LOW : It will be the COLOR mode if the input signal is HIGH. On the contrary, it will be the B&W mode. HIGH : It will be the B&W mode if the input signal is HIGH. On the contrary, it will be COLOR mode.
-
Page 22: Shutter
4.7 SHUTTER There’re 3 modes repetitively for 2 situations under this function: ** MAIN MENU ** LENS SET<┘ MANUAL, AUTO, DAY/NIGHT AUTO (when the DAY / NIGHT function has set to AUTO, EXTERNAL, WDR<┘ WHITE BALANCE or SCHEDULE mode), 2DNR & 3DNR SET<┘... - Page 23 *DAY/NIGHT When the DAY / NIGHT function is set to AUTO, EXTERNAL, or SCHEDULE mode, you can set DAY SHUTTER and NIGHT SHUTER individually. ** SHUTTER D/N ** DAY SHUTTER 1/50 The DAY SHUTTER and the NIGHT SHUTTER can be NIGHT SHUTTER 1/1000 set in 16 steps..
-
Page 24: Image
4.8 IMAGE ** MAIN MENU ** ** IMAGE ** LENS HIGH RESOLUTION HIGH SET<┘ SHARPNESS AUTO CHROMA WDR<┘ FREEZE WHITE BALANCE MIRROR 2DNR & 3DNR NORMAL SET<┘ DAY / NIGHT POS./NEG. COLOR RETURN EXIT SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘... -
Page 25: Effect
4.9 EFFECT ** MAIN MENU ** ** EFFECT ** LENS MOTION DETECTION SET<┘ FACE DETECTION AUTO WDR<┘ WHITE BALANCE E-ZOOM 2DNR & 3DNR PRIVACY MASK SET<┘ DAY / NIGHT EXIT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘ EXIT 1. - Page 26 •SIZE: Size of the block can be adjusted from 1 to 15; the higher the number, the bigger the block can be. •FRAME: Choose ON to display block only in frame, or OFF to display a whole block. •ALARM OUT: Choose ON to output the alarm; connect the alarm device to the ALO of the communication port on the rear panel so that the alarm can be output.
- Page 27 •AREA: There’re sub-menus under this mode. Press ENTER button to do further setups. Set the area size and shape here. The bigger the number, the bigger the block size can be. Polygon shapes can also be created by adjusting ANGLE TOP and ANGLE BOTTOM.
-
Page 28: System
4.10 SYSTEM 1. Please use the UP and DOWN buttons to SYSTEM on the MAIN MENU. ** MAIN MENU ** ** SYSTEM ** LENS CAMERA TITLE SET<┘ DATE/TIME AUTO COMM WDR<┘ SET<┘ WHITE BALANCE SYNC 2DNR & 3DNR LANGUAGE SET<┘ ENGLISH DAY / NIGHT FIRMWARE... - Page 29 * DATE / TIME ** DATE / TIME ** TIME 10:00:00 DATE 10:01:01 FORMAT YY:MM:DD RETURN EXIT HH: Hour, MM: Minute, SS: Second, YY: Year, MM: Month, DD: Date. Select ON/OFF to show/hide the Date/Time on the screen. * COMM There’re sub-menus under this section.
-
Page 30: Exit
4.11 EXIT Select EXIT to leave the MENU. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ WHITE BALANCE 2DNR & 3DNR SET<┘ DAY / NIGHT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘ EXIT Copyright © 2010. All Rights Reserved. www.okinausa.com REV122010-V17...