Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Okina WDE-7680
Summary of Contents for Okina WDE-7680
-
Page 1: User Manual
WDE-7680 680 TVL WDE-7610 610 TVL Hyper Wide Dynamic Camera - Effio WDR User Manual Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference. Copyright © 2010. All Rights Reserved. -
Page 2: Safety Warnings
Safety Warnings Read this manual carefully before installing the unit Please read this manual first for correct installation and operation. Never install the camera on a ceiling that cannot hold its weight The product may fall down and cause damages. Never install the camera near electric or magnetic fields Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers since the magnetic fields generate from above devices would distort the... - Page 3 THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE REFERENCE. Warranty OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1. Camera sticker is removed If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased.
-
Page 4: Table Of Contents
Table of Contents 1. INTRODUCTION ..........................1 1.1 M ..........................1 EATURES 1.2 C ..........................1 ONTENT 1.3 S ..........................2 PECIFICATIONS 2. CAMERA OVERVIEW ........................3 2.1 D ..........................3 IMENSIONS 2.2 D ....................4 ESCRIPTION OF AMERA ARTS 3. -
Page 5: Introduction
OSD functions. The camera also comes with 256x digital zoom, an intelligent auto exposure compensation system and an RS-485 remote control. WDE-7680 / WDE-7610 reproduces nearly perfect images like no other. 1.1 Main Features WDE-7680... -
Page 6: Specifications
1.3 Specifications T-408 T-410 Model WDE-7680 WDE-7610 1/3" Sony 760H Double-speed (Double-density) CCD Image Sensor NTSC: 1028(H)x508(V) NTSC: 811(H)x508(V) Number of Total Pixels PAL: 1024(H)x596(V) PAL: 795(H)x596(V) Color: 680 TVL, B/W: 700 TVL Color: 610 TVL, B/W: 630 TVL Resolution ; DSP... -
Page 7: Camera Overview
2. Camera Overview 2.1 Dimensions IRIS Copyright © 2010. All Rights Reserved. www.okinausa.com REV122010-V17... -
Page 8: Description Of Camera Parts
2.2 Description of Camera Parts AC24V Lens Mount This mount is used to install a CS-mount lens. CS-adaptor ring is required when using a C mount lens. Camera Mounting Screw Holes Screw hole for mounting the camera. Mount Adaptor The adaptor can be attached onto the top or the bottom of the unit. Auto Iris Lens Connector (4-pin type) The lens connector supplies the auto-iris lens (not supplied) with DC control signal. - Page 9 Communication Connectors 1. RS485+ 2. RS485- 3. Day & Night External Input (controlled by external infrared illuminator) 4. Day & Night Output 5. Alarm Out 6. Ground (10) Power Input Indicator Light When the camera is connected to a power source, the indicator light will be on. (11) RS485 Terminal Impedance Switch Set the first and the last equipment terminal impedances as 120Ω...
-
Page 10: Osd Operation
3. OSD Operation 3.1 OSD Control Buttons ① Use this button to move the cursor upwards to the desired item. ② RIGHT Use this button to move the cursor to the right to select or to adjust the parameters of the selected item. -
Page 11: Osd Operation
3.2 OSD Operation ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ WHITE BALANCE 2DNR & 3DNR SET<┘ DAY / NIGHT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘ EXIT Start to operate the OSD menu Press the ENTER button to bring up the OSD main menu to start operating OSD menus. -
Page 12: Configuration
4. Configuration 4.1 LENS When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to the LENS and press the ENTER button to do further setups. ** LENS ** ** MAIN MENU ** LENS DC<┘ LENS BRIGHTNESS SET<┘... -
Page 13: Agc
4.2 AGC When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to the AGC and press the ENTER button to do further setups. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ There’re 3 options under AGC: AUTO, OFF and WHITE BALANCE 2DNR &... -
Page 14: Wdr
4.3 WDR 1. When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to WDR and press the ENTER button to do further setups. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ There’re 3 modes under WDR function: WDR, WHITE BALANCE 2DNR &... - Page 15 *BLC (Back Light Compensation) ** BLC ** Options under this mode are LEVEL RETURN EXIT Level : 1~14. Sub-Menu under BLC mode. Even when there is a massive backlight behind the object, bright images of the background and the object can still be captured by selecting the BACKLIGHT mode. Level: 1~14 *OFF When set as OFF, there’ll be no wide dynamic range.
-
Page 16: White Balance Control
4.4 WHITE BALANCE Control The screen color can be adjusted by using the WHITE BALANCE function. 1. Please use the UP and DOWN buttons to WHITE BALANCE on the MAIN MENU and press the ENTER button to do further setups. 2. - Page 17 *MANUAL **MWB ** BLUE RETURN EXIT RED color value ranges from 0 to 255. BLUE color value ranges from 0 to 255. Sub-Menu under MWB mode. The manual adjustment mode enables a more precise adjustment. Increase and/or decrease the red and blue color values according to the color changes of the object to set the suitable color temperature.
-
Page 18: 3D Nr (Dynamic Noise Reduction)
4.5 2D &3D NR (Dynamic Noise Reduction) ** MAIN MENU ** ** 2DNR & 3 DNR ** LENS SET<┘ 2DNR ON<┘ AUTO 3DNR ON<┘ WDR<┘ RETURN EXIT WHITE BALANCE 2DNR & 3DNR SET<┘ DAY / NIGHT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘... - Page 19 *3DNR ** 3DNR** LEVEL RETURN EXIT Sub-Menu under the 3DNR mode •ON: When the 3DNR is set to ON, there’s a submenu available for level adjustment, ranged from 0 to 15. The higher the level, the more noise can be reduced but moving objects be blurred in low illumination condition.
-
Page 20: Day/Night
4.6 DAY/NIGHT The camera can be set in Color or B/W mode in the Day/Night function. ** MAIN MENU ** LENS SET<┘ AUTO WDR<┘ WHITE BALANCE There’re 5 modes under this function: COLOR, 2DNR & 3DNR SET<┘ DAY / NIGHT B&W, AUTO, EXTERNAL, SCHEDULE. - Page 21 •NIGHT DAY: When the camera detects the current light level is higher than the set value, it’ll switch from NIGHT mode to DAY mode. Settings can be set from 1 to 27. NOTE: The setting differences between DAY NIGHT and NIGHT DAY should be more than 5, or the camera will keep switching from DAY NIGHT and NIGHT DAY constantly.
- Page 22 *EXTERNAL ** DAY/NIGHT EXT ** NIGHT INPUT BURST RETURN EXIT HIGH ：3~12V OR OPEN LOW : GND Sub-Menu under the DAY / NIGHT EXTERNAL mode EXTERNAL mode allows the user to switch the DAY/NIGHT mode with external signals. For example, you can synchronize the DAY/NIGHT mode between the camera and the infrared LED illuminator.
- Page 23 *SCHEDULE ** DAY / NIGHT SCHEDULE ** •18 ：00 DAY / NIGHT •06 ：00 NIGHT / DAY RETURN EXIT Sub-Menu under the DAY / NIGHT SCHEDULE mode When the SCHEDULE function is selected, the camera will automatically switch between COLOR and B&W modes according to the preset time. •DAY/NIGHT: set the timing to switch from DAY/COLOR to NIGHT/B&W.
-
Page 24: Shutter
4.7 SHUTTER There’re 3 modes repetitively for 2 situations under this function: ** MAIN MENU ** LENS SET<┘ MANUAL, AUTO, DAY/NIGHT AUTO (when the DAY / NIGHT function has set to AUTO, EXTERNAL, WDR<┘ WHITE BALANCE or SCHEDULE mode), 2DNR & 3DNR SET<┘... - Page 25 *DAY/NIGHT When the DAY / NIGHT function is set to AUTO, EXTERNAL, or SCHEDULE mode, you can set DAY SHUTTER and NIGHT SHUTER individually. ** SHUTTER D/N ** DAY SHUTTER 1/50 The DAY SHUTTER and the NIGHT SHUTTER can be NIGHT SHUTTER 1/1000 set in 16 steps..
-
Page 26: Image
4.8 IMAGE ** MAIN MENU ** ** IMAGE ** LENS HIGH RESOLUTION HIGH SET<┘ SHARPNESS AUTO CHROMA WDR<┘ FREEZE WHITE BALANCE MIRROR 2DNR & 3DNR NORMAL SET<┘ DAY / NIGHT POS./NEG. COLOR RETURN EXIT SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘... -
Page 27: Effect
4.9 EFFECT ** MAIN MENU ** ** EFFECT ** LENS MOTION DETECTION SET<┘ FACE DETECTION AUTO WDR<┘ WHITE BALANCE E-ZOOM 2DNR & 3DNR PRIVACY MASK SET<┘ DAY / NIGHT EXIT COLOR SHUTTER MANUAL<┘ IMAGE SET<┘ EFFECT SET<┘ SYSTEM SET<┘ EXIT 1. - Page 28 •SIZE: Size of the block can be adjusted from 1 to 15; the higher the number, the bigger the block can be. •FRAME: Choose ON to display block only in frame, or OFF to display a whole block. •ALARM OUT: Choose ON to output the alarm; connect the alarm device to the ALO of the communication port on the rear panel so that the alarm can be output.
- Page 29 •AREA: There’re sub-menus under this mode. Press ENTER button to do further setups. Set the area size and shape here. The bigger the number, the bigger the block size can be. Polygon shapes can also be created by adjusting ANGLE TOP and ANGLE BOTTOM.
-
Page 30: System
4.10 SYSTEM 1. Please use the UP and DOWN buttons to SYSTEM on the MAIN MENU. ** MAIN MENU ** ** SYSTEM ** LENS CAMERA TITLE SET<┘ DATE/TIME AUTO COMM WDR<┘ SET<┘ WHITE BALANCE SYNC 2DNR & 3DNR LANGUAGE SET<┘ ENGLISH DAY / NIGHT FIRMWARE... - Page 31 * DATE / TIME ** DATE / TIME ** TIME 10:00:00 DATE 10:01:01 FORMAT YY:MM:DD RETURN EXIT HH: Hour, MM: Minute, SS: Second, YY: Year, MM: Month, DD: Date. Select ON/OFF to show/hide the Date/Time on the screen. * COMM There’re sub-menus under this section.
-
Page 32: Balun Function (Utp)
4.11. Balun Function (UTP) A Balun's function is used on these cameras. It would normally require 3 terminals (Video + Power + RS485) to succeed a connection. However, via Balun, 1 is sufficient. cameras OSD can be used and controlled remotely via RS485 communication port. The most important thing is transmission can still stay clear and true.