Okina WDE-7680 User Manual page 21

•NIGHT DAY: When the camera detects the current light level is higher than the
NOTE:
The setting differences between DAY
more than 5, or the camera will keep switching from DAY
NIGHT DAY constantly.
•DELAY TIME: Sometimes there's only a sudden and short light level change.
•NIGHT OUTPUT
•BURST : Turn the BURST function off to reduce the color noise under B&W mode.
NOTE:
The BURST function is adjustable under B&W, EXTERNAL and SCHEDULE
mode.
Copyright © 2010. All Rights Reserved.
www.okinausa.com
set value, it'll switch from NIGHT mode to DAY mode. Settings
can be set from 1 to 27.
Delay time can be set to avoid switching too fast. The camera will
switch the mode after the set DELAY TIME passed. DELAY TIME
can be set from 0 to 255 seconds.
OUTPUT GND
DNO
SYSTEM
5V
COLOR
GND
B&W
However, not every DVR machines can receive video signals without
the color burst signals. If the camera cannot switch back to COLOR
mode from B&W mode, please turn the BURST function on.
NIGHT and NIGHT DAY should be
5V
GND
5V
When it's under B/W mode, the infrared illuminator
can be triggered to be on, via DNO pin of the
communication connector.
17
NIGHT and
REV122010-V17