Advertisement
Quick Links
Advertisement
Related Manuals for Okina SP27HB-V55DN
Summary of Contents for Okina SP27HB-V55DN
- Page 1 OKINA SP27HB-V55DN SP37HB-V55DN High Speed Dome Camera Series USER MANUAL v2.61...
-
Page 2: Table Of Contents
WARNING CONTENTS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN 1. Precaution............1 OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR 2. Features............2 OTHER OPENINGS ON THE EQUIPMENT. 3. -
Page 3: Precaution
2.FEATURES 1.PRECAUTION Refer all work related to the installaion of this product to qualified service The high speed dome camera series are designed for in- and outdoor video surveillance personnel or system installers. application. The integrated, motorized pan-tilt mechanic allows user to point the camera to any position( 360°... -
Page 4: Packing List
3.PACKING LIST 4.INSTALLATION Indoor Safety Instructions before starting High Speed dome Series Camera Series USER'S MANUAL - Do not install and operate this appliance in a flammable and explosive environment. - Make sure that the installation is done according to the local electricity safety regulation of your country. -
Page 5: Installation
4.INSTALLATION 4.INSTALLATION Connector description Using optional accessories The speed dome cameras can be connected to various optional accessories through The wiring cable of the PTZ camera provides connectors for power supply, video and the standard connector types, which simplifiy the cable handling and avoids possible I/O interface mistakes. - Page 6 4.INSTALLATION 4.INSTALLATION RS-485Termination Star-Connection The star-form connection is mostly used. it enables the connection of different dome Devices using Rs485 control are usually connected in daisy-chain. which reqiuers cameras in longer distance. It is recommended to use RS-485 distributor to ensure the termination with 120 resistor on both ends.
-
Page 7: Operation
4.INSTALLATION 5.OPERATING THE SPEED DOME Initial Screen Installing the core unit to base board. The PTZ camera core unit and base board are packed seperatly, in order to be After powering up, the camera will enter the FIRMWARE V2.61 protected through the transportation. After unpaking and during the installation, the self-test mode and display the status screen( Protocol: PELCO core unit should be installed as following:... - Page 8 OSD - MAP OSD Menu The PTZ cameras are equipped with new OSD-Menu function. All operation functions and camera related settings can be changed or modified here. In order to use the OSD function, a telemetric controller device, such as Keyboard, DVR or other devices with similiar function is necessarily required.
- Page 9 6.OSD - System Setting 6.OSD - Motion, Clear Motion control System Setting M O T I O N SYSTEM SETTING AUTO FLIP: Auto. Image flip in tilt range from 90° to 180° In system setting menu, you can modify operation and AUTO FLIP PROPORTIONAL PAN: depends on the zoom factor, the display setting, such as dome label, temperature and...
- Page 10 OSD - Camera Setting OSD - Preset, Scan Function setting Camera setting FUN C T ION S ET T ING C A M E R A S E T T I N G In function setting menu, you can define and activate In camera setting menu, you can setup camera module ZOOM SPEED HIGH...
- Page 11 6.OSD - Patterns, Tours 6.OSD - Zones and Privacy Mask Zone Pattern ZONES PATTERNS Pattern records the user’s operation steps on You can define the zones in the whole PT range up performing PTZ control and stores as a track. The ZONES NUMBER to up to 8 zones with individual label.
-
Page 12: Osd
6.OSD - Alarm Setting 7. Dome Address & Protocol Privacy Mask ( Window Blanking) W I N D O W B LANKING Protocol setting Privacy Mask is used to protect the privacy area not to be In order to establish a connection for WINDOW NUMBER displayed once the camera is pointed on, such as telemetric control with keyboard device. - Page 13 7. Address ID, 1 to 67 7.Address ID, 68 to 135...
- Page 14 7. Address ID, 136 to 203 7. Address ID, 204 to 255...
-
Page 15: Specifications
8. Specification P-042 P-043 P.I.C. SP27HB-V55DN SP37HB-V55DN Model Signal Format PAL / NTSC Scanning 2:1 Interlace Image Sensor 1/4” Sony Super HAD Color CCD H. Resolution Color: 550 TVL / B&W: 680 TVL H: Appr. 55.5°(Wide) to 2.24°(Tele) H: Appr. 55.5°(Wide) to 1.59°(Tele) Viewing Angle V: Appr.