White Balance Control - Okina WDE-7680 User Manual

4.4 WHITE BALANCE Control

The screen color can be adjusted by using the WHITE BALANCE function.
1. Please use the UP and DOWN buttons to WHITE BALANCE on the MAIN MENU and
press the ENTER button to do further setups.
2. Please select the desired item and press LEFT and RIGHT buttons to adjust the settings.
** MAIN MENU **
LENS
AGC
WDR
WHITE BALANCE
2DNR & 3DNR
DAY / NIGHT
SHUTTER
IMAGE
EFFECT
SYSTEM
EXIT
*ATW (Auto Tracking White Balance)
This mode can be used within the color temperature range from 1800°K to 10500°K (e.g.,
around fluorescent lights, outdoors, around sodium vapor lamps or inside tunnels).
*AWB (Auto White Balance)
Select this to allow the camera automatically adjust the white balance under all conditions.
* AWC (Push Lock)
**AWC **
PRESS AND HOLD
ENTER BUTTON
UNTIL AWC COMPLETED.
Sub-Menu under AWC mode.
To find the optimal setting for the current luminance environment in this mode, point the
camera towards a sheet of white paper and press the ENTER button.
condition changes, readjust it.
Copyright © 2010. All Rights Reserved.
www.okinausa.com
SET<┘
AUTO
WDR<┘
ATW
SET<┘
COLOR
MANUAL<┘
SET<┘
SET<┘
SET<┘
Follow the instructions
shown on the screen to
complete the setting.
12
There're 6 modes under this function: ATW,
AWB, AWC (Push Lock), MANUAL, OUTDOOR,
INDOOR and .ANTI CR.
**AWC **
COMPLETED
PRESS ENTER RETURN
Sub-Menu under AWC mode.
Whenever the
REV122010-V17