Destiny And Epic Marquis Signature Collection - Marquis Spas Destiny Owner's Manual

S P A C O N T R O L O P E R A T I O N
DESTINY & EPIC MARQUIS SIGNATURE COLLECTIONS
PUMP PRIMING (Pr)
Pr
Pump priming feature begins at start-up. When your spa
is energized, the LCD window displays a "Pr" message.
This mode lasts approximately four to five minutes, if not
exited manually by pressing the TEMP+ pad.
UNDERWATER AND ENTRYWAY LIGHTS
Press the LIGHTS pad on the bather's panel or
remote control (option) to turn the underwater and
Entryway lights on and off. The icon appears in the
lower center of the display when the light is on. The
low-voltage system produces a night light for
evening use. After being on for 60 minutes, the
lights automatically turn off. (See SETTINGS for
automatic light programming.)
AQUA AMBIANCE™ AND CONSTELLATION™
Press LIGHTS pad to turn on step one. Press LIGHTS
pad again to turn off for one second. Then press
LIGHTS pad again for step two. Repeat for all options.
WATERFALL TRAY FEATURE (OPTION)
The Waterfall feature and convenience tray attaches
securely to the dual Vortex skimmer tops. The water
flow is controlled by an independent valve. NOTE:
Don't remove the waterfall top while the pumps are
running.
SOAK TIMER
The soak timer starts the first time you press the
TIMER pad. The LCD window displays "E" for the
elapsed time followed by time in minutes ("00, 01,
02", etc.). A second press of the TIMER pad will exit
the timer mode. The timer display and the current
temperature display will alternate every 10 seconds.
43