Marquis Spas Destiny Owner's Manual page 40

Marquis Ozonator
reduces the need for
chemical sanitizers.
S P A C O N T R O L O P E R A T I O N
achieve the most effective cleansing. Selectable
choices for the settings of the operation systems
allows flexibility and ensures your Marquis spa remains
easy to maintain for your particular set of circumstances.
SOLID-STATE OZONATOR (OPTION)
The ozone generator functions whenever the system
is running on filter or clean up cycles.
CAUTION: Do not block ozone injector fitting (see
spa diagrams). Blockage or partial blockage could
result in back pressure that could flood the ozonator
and result in failure.
SMARTCLEAN™ FILTRATION
Your spa is preset at the factory with a default setting
to filter itself using the jet pump on low-speed for two
hours twice in a 24 hour period. These settings
represent the filter settings necessary for average
use. The timing of the first filter cycle is determined by
when the spa was initially energized. The first cycle
begins six minutes after this initial power-up. The
second filter cycle begins 12 hours after the first cycle.
To adjust the filter settings
Press the SETTING pad to display the filter time
settings (F1, F2, F4, F6). Use the TEMP+- pad to scroll
through the options. When desired selection has
been reached, press the SETTING pad again to enter
selection and advance to the filter cycle settings (2C,
1d, 1n). For example, if you select 2C and F2, your spa
will filter two hours twice a day for a total of four hours
of filtration daily.Use the TEMP+- pad to scroll through
filter cycle options. When desired selection has been
reached, press the SETTING pad to enter selection
and advance to the smart logic settings.
Selectable filter cycles and cycle duration
• 2C: twice per day (once every 12 hours)
• 1d: once during the day
• 1n: once during the night
• F1: 45 minutes
• F2: 2 hours
• F4: 4 hours
• F6: 6 hours
SMARTCLEAN™
Your spa is preset at the factory with a default setting
to filter for one hour (1H) every time your spa is used.
This SmartClean™ filtration cycle begins 30 minutes
after the spa light or jet pump has been deactivated.
The pump runs on low-speed to filter the water for the
cycle's duration.
40