Marquis Spas Destiny Owner's Manual page 42

S P A C O N T R O L O P E R A T I O N
Sleep Mode (SL)
Your spa will maintain a water temperature that is 20°F
(7°C) below the set temperature. The heater functions
only during a filter cycle. The LCD window displays "SL"
flashing alternately with the actual temperature when the
spa is up to set temperature and displays "SL" steadily
when below set temperature.
To Adjust the Heat Mode:
First press the SETTING pad to display the heat mode
settings (St, Ec, SL). Use the TEMP+- pad to scroll
through the options. When desired selection has been
reached, press SETTING pad again to enter selection
and advance to the filter cycle settings (F1, F2, F4, F6).
Maintenance Reminders
• CL: Clean Filter LED will illuminate every 30 days.
• CH: Change Water LED will illuminate every 90 days.
To reset maintenance reminders, press SETTINGS pad.
SYSTEM LOCK
Once you find and establish the settings that work best
for your individual needs, use system lock to keep from
inadvertently changing the settings.
Press the TEMP+- pad and then immediately press the
SETTING pad. Unlock by repeating sequence. While the
system is locked, you may still operate the jets and light.
The LCD window displays LC to indicate the system is
locked when you try to change the temperature or
settings.
REMOTE CONTROLS (optional)
(See SPA CONTROL OPERATION, Jets)
42