Table of Contents
Advertisement
|
|
|
20
IBM TotalStorage FAStT600 Fibre Channel Storage Server: Installation and User's Guide
this step for the second controller .
3
3
Figure 12. Power supply removal
4. To remove a hard disk drive 2 , press the blue latch 3 and pull the handle
1 upwards; then carefully pull the drive from the storage server.
Attention: Place the removed drives in a horizontal position, with the printed
circuit boards facing down. Do not stack the drives on top of each other. Protect
from vibrations or sudden shocks.
Note: Before you remove any hard disk drives, make sure that you mark their
location so that you can reinstall them in the same location.
Repeat this step for all hard disk drives.
4
Figure 13. Hard disk drive removal
5. Use the attached template and stickers to mark the appropriate holes on the
rack; then install clip nuts or cage nuts as required for the rack cabinet.
Note: Use the cage-nut-insertion tool or a flat-blade screwdriver to install cage
nuts.
Advertisement
Table of Contents
