Remote And System Operations; Passive Arming; Auto Re-Arming; Onetime Bypass - Automate 5204A Owner's Manual

Remote and System Operations

Passive Arming*

Park and exit the vehicle, after the doors are closed the Passive arming
countdown begins. The led flashes quickly and upon reaching 20 sec-
onds the siren then chirps once. At 30 seconds the system arms itself.
Anytime before the system arms you can re-enter the vehicle or
open the trunk to load or unload items and, after closing passive arm-
ing resumes.
To stay secure in case of accidental disarming of the system, if
a door is not opened within 30 seconds the system re-arms itself and
locks the doors.

Auto Re-arming*

Auto re-arm ensures the vehicle stays protected if it is not entered after
disarming by remote control. After disarming by remote, the alarm
automatically re-arms itself (and locks the doors if programmed on) in
30 seconds. Open any point of entry to stop the re-arm until the next
disarm by remote.

Onetime Bypass*

Turn the ignition On for one to three seconds and then Off. The siren
chirps once to confirm one-time bypass is enabled.
One-time bypass can be used to temporarily bypass the Passive arm-
ing operation for one cycle. It also bypasses the comfort closure and
auxiliary channel outputs programmed to activate when arming. After
the next disarm all operations return to normal.
* These features must be turned on by an authorized Directed dealer.
© 2012 Directed. All rights reserved. 21