Sensor Adjust - Automate 5204A Owner's Manual

6. Press/hold the remote
The siren emits one sound to confirm learning.
Note: the 2-way remote confirms by playing tones as well.
7. Repeat for each remote control to be learned (up to four)
8. Turn the ignition off or wait 60 seconds to exit learning, the siren
emits 2 sounds to confirm.
Pairing will exit if:
There is no activity for 60 seconds
The doors are closed
The ignition is turned off.
The control button is pressed too many times.

Sensor Adjust

To avoid unintended alarm triggers; it is recommenced that an autho-
rized Directed Dealer performs all sensor adjustments.
© 2012 Directed. All rights reserved.
until the transmit LED turns on solid.
13