Alarm Features; Normal Arm Protection; Sensor Warn-Away - Automate 5204A Owner's Manual

Alarm Features

Normal Arm Protection

Status LED: The Control Center Status LED flashes as a visual indicator
that your vehicle's security system is active.
Starter Kill: The Failsafe starter kill relay prevents the engine from
starting
Note May require additional parts and installation
Sensor triggers: The shock sensor can distinguish minor impacts from
major impacts to the vehicle exterior. Minor impacts causes the system
to emit a Warn-away output by chirping the siren and flashing the
parking lights for 3 seconds. Major impacts caused for example by a
forcible entry attempt, results in a Full Trigger output. The siren sounds
and the parking lights flash for 30 seconds or longer. Both Warn-
away and Full Triggers send a message to the remote control.
Point of entry triggers: Opening the hood or trunk causes a Full Trig-
ger output, while opening a Door or turning on the Ignition causes the
the siren to chirp 3 seconds before beginning the Full Trigger output.
This 3 second delay allows time to disarm and silence the siren in
case of accidental trigger. The Full Trigger message is still sent to the
remote.

Sensor Warn-away

When the system sensors detect a Warn-away trigger the siren chirps
and parking lights flash for 3 seconds. No messages are sent to the
Responder LE remote control for Warn-away triggers.
14 © 2012 Directed. All rights reserved.