Trunk Release; Remote Start; Key Takeover - Automate 5204A Owner's Manual

4 or 5 fault tones play to alert of the report.

Trunk Release

Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The Aux LED and tones play to confirm.

Remote Start

Press and release
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn On and the Remote start LED and On tones play,
or the engine and parking lights turn Off and the Remote start LED and
Off tones play to confirm. If a Remote start configuration issue prevents
the engine from starting, a fault tone will play while the parking lights
flash a Remote Start fault report*** to identify the fault.

Key Takeover

When you are ready to drive
The system keeps the engine running until the vehicle is ready to
be driven. To perform Key Takeover:
Disarm the system and enter the vehicle, do not step on the
1.
foot brake.
Insert the key, turn it to the run position, and then step on the
2.
foot brake, the remote start then turns off.
3. The parking lights turn off to indicate remote start is off.
4. The vehicle is ready to drive.
Note: Some Push-to-start vehicles do not offer the key takeover
© 2012 Directed. All rights reserved. 9