IBM AS/400 Hardware User Manual page 69

AS/400
AS/400 Prompt Parameter
Connection CNN
type
Exchange EXCHID
identifier
X.25 link LINKPCL
protocol
Link type LINKTYPE
Local location LOCADR
address
4700 Macro
COMLINK ACB
For SDLC finance communications, if the line is switched
(CNN(*SWTPP) on the CRTLINSDLC command or
SWITCHED(*YES) on the CRTCTLFNC command), include the
SWM value on the ACB parameter (ACB = SWM).
X25CKT XID
The values specified for the 4700 and the AS/400 system must
match. The block number for the 4700 (first 3 digits of the
AS/400 EXCHID parameter) must be
The 4700 parameter values are decimal numbers; the AS/400
values are hexadecimal.
X25CKT LLC
For X.25 finance communications, the LLC parameter must
specify QLLC for the type of logical link control.
LINKPCL(*QLLC) must also be specified on the AS/400
CRTCTLFNC command.
COMLINK TYPE
4700 TYPE parameter must match the LINKTYPE parameter
specified on the AS/400 CRTCTLFNC command.
v If LINKTYPE(*SDLC), specify TYPE = 4502.
v If LINKTYPE(*X25), specify TYPE = 1424.
STATION ID
If the optional LUA parameter is not specified, the value
specified for the 4700 ID parameter must match the value
specified for the LOCADR parameter on the AS/400 create
device description command. If LUA is specified, the LUA
parameter value must match the LOCADR parameter.
The 4700 parameter values are decimal numbers; the AS/400
values are hexadecimal.
Chapter 7. Communicating with remote workstation controllers
4700 Parameter
.
63