AS/400
AS/400
Prompt
Parameter
Remote
RMTLOCNAME
location
name
Station
STNADR
address
Example: Connecting AS/400 to a 5494 controller connected by SDLC
Configuration parameters must be coordinated when you connect an AS/400 system to a 5494 controller.
The following diagram shows the AS/400 parameters and 5494 parameters that need to match when you
use SDLC.
50
Version 5
5494
Field
Subfield
AS/400 Value
12
-
-
2
-
-
5494 Value
-
Values specified for the AS/400
CRTCTLRWS command and
for the 5494 Remote Control
Unit must match.
-
Values specified in the AS/400
controller description and for
the 5494 Remote Control Unit
must match. This value must
also be specified as the last 2
digits of the AS/400 EXCHID
parameter.
Notes