IBM AS/400 Hardware User Manual page 32

AS/400 Prompt
Mode description MODD
name
Class-of-service COSD
description name
For more information on AS/400 parameters, see Communications Configuration
Examples: Connecting AS/400 to a host system
Configuration parameters must be coordinated when you connect an AS/400 system to a host system.
Example 1: AS/400 to host system over a nonswitched SDLC line.
This diagram shows the AS/400 values that need to match the VTAM values when you use a nonswitched
SDLC line.
26
Version 5
AS/400 Host Definition
Parameter Statement
MODEENT
MODEENT
Host Parameter
LOGMODE
AS/400 mode description name specified on the AS/400
CRTMODD command (MODD parameter) must be
defined in the host logon mode table using the
LOGMODE parameter on the MODEENT macro
instruction. The mode name must also be included in
the CICS/VS terminal control table (DFHTCT)
MODENAM parameter.
COS
AS/400 class-of-service description name specified on
the AS/400 Create Class-of-Service Description
(CRTCOSD) command (COSD parameter) and
CRTMODD command (COS parameter) must be
defined in the host logon mode table using the COS
parameter on the MODEENT macro instruction. The
class-of-service description must also be defined in the
VTAM class-of-service table.
.