Table of Contents
Advertisement
Image settings
Image settings allow you to set up the built in camera and optimise picture quality.
Image Size
This setting defines the size of images taken by the built-in camera.
Command:
#32#Size#
Example:
#32#3#
Response:
Image size has been reset to 3
You can chose from three image sizes. Default is Size 2:
Size
Width x Height
(Pixels)
1
160 x 128
2
320 x 240
(QVGA)
3
640 x 480
(VGA)
Notes
1.
If you select size 3, image quantity is automatically changed to 2.
2.
Image size and Transmit time are approximate.
3.
MMS Transmit time is calculated as approximately 1.11 x Image Size x Image Quantity,
assuming default Quantity.
4.
Additional time is taken for the MMS to be transmitted through the mobile network and
downloaded to the destination mobile phone.
5.
This setting sets the size of image that YOYOCam sends in response to the #03# Capture
Image(s) command.
Image Quantity
This setting defines how many images are included in the MMS message that YOYOCam sends upon
alarm. YOYOCam defaults to 5 images at size 2 (320 x 240 pixels). The images are taken at the
interval selected via the Image Interval command. Default interval is 0.5 seconds.
Command:
#33#Quantity#
Example:
#33#2#
Response:
Number of Alarm images has been set to 2
YOYOCam G3 User Guide v0.2
Image
Image size
Quantity
Transmit
Default/Max
5 / 8
4 kBytes
25 sec
5 / 8
9 kBytes
50 sec
2 / 2
33 kBytes
75 sec
Application
time
View images on small-screen mobile
phone
(not recommended)
View images on mobile phone (Default)
View images on smartphone or computer
(best resolution)
Page 34
Advertisement
Table of Contents
