Command Summary; Master - YOYOMOTION YOYOCam G3 User Manual

Command Summary

MASTER

There is one Master user who has complete control over YOYOCam. Master-only commands:
Text to send
#08#Password#
#00#
#14#NewMasterNumber#
#04#OldPassword#NewPassword#
#06#UserNumber#
#113#UserNumber#
#109#
#106#EmergencyNumber#
#107#EmergencyNumber#
#107#
#127#LanguageCode#
#137#0# or #137#1#
#146#0# or #146#1#
#147#0# or #147#1#
#204#0# or #204#1#
#208#position#
YOYOCam G3 User Guide v0.2
What it does
Factory Reset
(after factory reset) sender becomes Master
Change from present Master number to NewMasterNumber
Change the Guest password (default is 1234)
e.g. send #04#1234#6789# to change password to 6789
Add a User.
e.g. send #06#0702222222# to add 0702222222 as a user.
Delete a User
Delete all Email addresses
Add Emergency Number (called when emergency button
pressed on remote)
Delete Emergency Number
Delete all Emergency Numbers
Set Language. 0= as SIM (default); 1 = English
Disable (0) SMS notification of arm/disarm by remote control
(default). Enable (1).
Disable (0) sending MMS to all Users upon alarm (default)
Enable (1) sending MMS to all Users upon alarm
Disable (0) sending SMS to all Users upon alarm (default)
Enable (1) sending SMS to all Users upon alarm
Disable (0) forwarding received SMS to Master (default).
Enable (1) forwarding SMSs from non-registered user numbers
to Master
Place Master number at position (1 to 10) in emergency
number calling list
Page 56