YOYOMOTION YOYOCam G3 User Manual page 14

1. Mount the bracket on the wall, ceiling or other surface as required.
2. Attach YOYOCam to the threaded tip of the bracket.
3. Screw the round lock-nut towards YOYOCam to secure YOYOCam on the mount.
4. Loosen the screw so that the angle can be adjusted.
5. Tighten the screw to fix YOYOCam in the desired position.
For best results:

Avoid pointing YOYOCam at bright lights or windows. Direct light in front of the camera may
significantly reduce the quality of the images.

Position high up so that the camera is angled at least 30 degrees downwards.

Position in a location where there is adequate GSM signal strength.

Make test shots (e.g. using command #03#) to check image quality. Adjust angle and/or
position of YOYOCam until images are optimal.

Check that the infrared body detection and/or camera movement detection is working.
YOYOCam G3 User Guide v0.2 Page 14