SMS Notification when power supply changes
YOYOCam can notify you when the power supply switches between external power adaptor and
internal battery:
To switch SMS power notification on and off
Turn On:
#144#1#
Response:
SMS notification upon power source change - enabled
Turn Off:
#144#0#
Response:
SMS notification upon power source change - disabled
Notifications when enabled:
External power applied:
External power removed:
SMS Notification when alarm is activated or deactivated by a remote control
YOYOCam can notify the Master by SMS when it is armed or disarmed:
To switch Remote Control Arm/Disarm notification on and off
Turn On:
#137#1#
Response:
SMS notification when status changes - on
Turn Off:
#137#0#
Response:
SMS notification when status changes - off
Notifications when enabled:
When armed by a remote:
When disarmed by a remote:
Auto-Disarm YOYOCam
In some circumstances YOYOCam may be repeatedly triggered, for example by an employee at work
who does not know how to disarm YOYOCam. You can configure YOYOCam to stop sending alarm
messages after a given number of times by auto-disarming.
To set number of alarms before auto-disarm:
Command:
#139#Times#
Example:
#139#3#
Response:
Disarm the YOYOCam after 3 alarms
Note: Times must be at least 1.
Note: After the given number of alarms, YOYOCam auto-disarms and sends an SMS:
YOYOCam G3 User Guide v0.2
(Default)
External power – resumed
External power lost. Running on battery.
(Default)
YOYOCam is armed
YOYOCam is disarmed
Page 39