Table of Contents
Advertisement
5. Insert the SIM card:
a) Slide the metal clip upwards (1) to unlock it, as indicated by the arrow and OPEN.
b) Lift up the clip (2)
c) Place the SIM in to the holder, gold contacts downwards. Be careful not to let the SIM card
drop through the back of the holder and in to the device.
d) Lower the clip (3)
e) Slide the clip downwards (4) to lock it in place, as indicated by the arrow marked CLOSE.
6. Insert the power connector and lead the power cable out to the left or right, as required.
7.
Replace the Locate the battery cover in place and slide it up until it stops. Snap the cover
closed by pressing the right or left side (not the middle) of the lower edge as shown.
STEP 2. Mount YOYOCam G3
Built-in Stand
Un-clip the stand and rotate backwards.
Mounting Bracket
A mounting bracket is included with YOYOCam
YOYOCam G3 User Guide v0.2
Threaded tip
Round lock nut
Page 13
Advertisement
Table of Contents
