Table of Contents
Advertisement
Images
Text to send
#03#
#03#Quantity#
#03#Quantity#1#
#30#NumberOrEmail#Quantity#
#108#EmailAddress#
#116#parameters#
#115#0# or #115#1#
#32#Size#
#33#Quantity#
#103#ImageInterval#
#34#BrightnessLevel#
#38#ContrastLevel#
NOTE: Quantity (image quantity) is in range 1-8 for image sizes 160 x 120 and 320 x 240. Quantity
must be 1-2 for image size 640 x 480.
Built-in Temperature Sensor
Text to send
#15#0# or #15#1#
#16#LoTemp#Hitemp#
Wireless Sensors & Remote Control
Text to send
#05#SensorDescription#
#05#*SensorDescription#
#196#SensorDescription#
#112#SensorDescription#
#111#
#39#0#
#39#1#
Advanced Settings & Check Settings
#143#0# or #143#1#
#144#0# or #144#1#
#31#0#
#31#1#
#31#2#
#07#
#09# or #09#1#
YOYOCam G3 User Guide v0.2
What it does
Take one image and send it to the requesting user
Take a number (Quantity 1-8) of images and send to requestor by
MMS
Take a number (Quantity 1-8) of images and send to requestor by
E-Mail. (User must first have sent #108#EmailAddress# to tell
YOYOCam their E-Mail address.
Request a sequence of images to another mobile number / E-Mail.
Add/Update Email address
(Master / User sends from their own mobile phone)
Request YOYOCam to automatically send images according to a
schedule.
#116#Day#StartTime1#EndTime1#IntervalTime1
#StartTime2#EndTime2#IntervalTime2
#StartTime3#EndTime3#IntervalTime3#
Disable (0) (default) above scheduled image send; enable (1).
Set image size: 1: 160x128; 2: 320x240 (default); 3: 640x480
Set quantity of images to take when triggered: 1-8 (default 3; note
1)
Interval between images. Range 3 (0.3 sec) to 10 (1.0 sec); default
5 (0.5 sec)
Camera brightness. 1 is darkest and 5 is lightest. Default is 4.
Camera image contrast 1 is softest and 5 is most contrasty.
Default is 4
What it does
Disable (0) (default) or enable (1) temperature alarm
Set temperature range.
What it does
Add wireless sensor
Add wireless sensor (Armed-Only Mode; SMS+MMS notification)
Add wireless sensor (Always-On Mode; SMS notification)
Delete wireless sensor
Un-pair all remote controls
Call mode – When Emergency button pressed, numbers are dialed
SMS/MMS mode – when Emergency button is pressed,
YOYOCam sends SMS and MMS.
Disable (0) indicator LED; enable (1) (default)
SMS notification of power status: 0: off; 1: on (default)
Infrared LED lighting is used when YOYOCam takes an image in
low lighting or darkness, otherwise off.
Infrared LED lighting is on during low lighting or dark conditions
e.g. from dusk to dawn. Use this setting with #22#1# movement
detection.
Infrared LED light is always off.
Check the settings and status
Get the command list (#09# for SMS, #09#1# for MMS response)
Page 59
Advertisement
Table of Contents
